Cement

How do I find Moen faucet model number?


The model/series number is usually a four or five digit number beginning with “7” or “8” and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.

How do I order replacement parts from Moen? Replacement parts may be obtained by calling 1-800-289-6636 (Canada 1-800-465-6130), or by writing to Moen Incorporated, 25300 Al Moen Drive, North OImsted, OH 44070-8022. Proof of purchase (original sales receipt) from the original consumer purchaser must accompany all warranty claims.

How do I find my Moen shower faucet model number? The model/series number is usually a four or five digit number beginning with “7” or “8” and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.

Are Moen shower valves universal? For many years Moen tub/shower valves have been manufactured using one of three valves. These valves are Standard, Posi-Temp and Moentrol. Although the look is similar, the trim is not necessarily interchangeable. If this is the way your Moen valve operates, any Posi-Temp trim will fit.

How do you replace a Moen kitchen faucet cartridge? https://www.youtube.com/watch?v=pyBTL7GugHo

How do I find Moen faucet model number? – Additional Questions

How do I know what bathroom faucet I have?

Spot an American Standard faucet by its 22-point broach. To double check, measure the broach. If it measures 0.375 inches (0.95 cm), then it’s likely an old American Standard model, and if it measures 0.438 inches (1.11 cm), then it’s likely a current American Standard model.

How do I know what model Moen faucet I have?

The model/series number is usually a four or five digit number beginning with “7” or “8” and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.

How do you remove a cartridge from a Moen faucet?

How do I get a free Moen cartridge?

Are shower valves universal?

Re: Are Tub/Shower Valves Interchangeable? First, you absolutely CANNOT mix manufacturers on trim and rough-in valves. In fact, even within one manufacturer, they have many valves and the trims are not interchangeable. Shower sets are not always sold as separate trim and rough.

How do I find the make and model of my kitchen faucet?

– The model number is printed on a tag that is attached to the cold water supply line of the faucet.
– The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet.
– The model number, or part number, is typically preceded by “P/N.”

How do I know what kind of faucet I have?

– Find the logo. The first and easiest way to find out the brand of your kitchen faucet will be if you can locate the logo somewhere on it.
– Find a model number.
– Count the splines on the broach and measure the stem.
– Distinguishing features.
– Use a broach gauge.

Are all Moen kitchen faucet cartridges the same?

Fits all Moen two-handle kitchen and lavatory faucets and two- and three-handle tub/shower faucets created prior to the launch of our Duralast® two-handle cartridges. The 1224 and Duralast cartridges are not interchangeable.

Where do I find my shower faucet model number?

The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by “P/N.”

How do I identify my Moen shower valve?

The model/series number is usually a four or five digit number beginning with “7” or “8” and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.

How do I choose a kitchen faucet size?

– Step 1: Determine Your Project Scope.
– Step 2: Take Stock of the Sink and Mounting Holes.
– Step 3: Measure the Faucet Centers.
– Step 4: Check the Surrounding Space.

Are shower faucets universal?

They are all universal and all Delta Shower Trim Kits will fit every single one of these valves.

Are Moen replacement cartridges free?

If this faucet should ever develop a leak or drip during the Warranty Period, Moen will FREE OF CHARGE provide the parts necessary to put the faucet back in good working condition and will replace FREE OF CHARGE any part or finish that proves defective in material and manufacturing workmanship, under normal

Are all shower valves universal?

Are all shower valves universal?

Does Home Depot carry Moen parts?

Moen – Faucet Parts – Plumbing Parts – The Home Depot.

How can I tell what brand my kitchen faucet is?

– Find the logo. The first and easiest way to find out the brand of your kitchen faucet will be if you can locate the logo somewhere on it.
– Find a model number.
– Count the splines on the broach and measure the stem.
– Distinguishing features.
– Use a broach gauge.

Similar Posts